Stained glass windows
Thanks to the stained glass window, daylight falls inside the tent, allowing for comfortable use during various celebrations or rest in the open air.
Weight of roof approx. 240g
Wall thickness approx. 240g
The windows provide a supply of daylight, so tents with this tarp are used for restaurants as an additional place for guests or as a fan zone. This type of hull makes the use of the tent convenient and possible even with the tent completely closed.
Weight of roof approx. 560g
Wall thickness approx. 500g
Air-control double vents
Hermetic - sealing turnips
This type of tent is constructed of segmented roof and walls equipped with large stained glass windows. This is a great choice when we often organize events for different number of guests. Then once we can set up a smaller tent or add more segments and create more space.
Weight of roof approx. 580g
Wall thickness approx. 500g
Air-control double vents
Hermetic - sealing turnips
Multi-size - easy change of length
If you want to have an additional restaurant space that will need heating, the choice of this tarpaulin will be the best. You can place heat heaters or other heaters inside that will fulfil your functions.
Weight of roof approx. 620g
Wall thickness approx. 620g
Air-control double vents
Hermetic - sealing turnips
Multi-size - easy change of length
Flammable
Transparent sides
The single wall is equipped with a large, completely transparent window. Such a window shines very well inside the tent. This is therefore the right choice when we want our products or goods to be visible from the outside.
Weight of roof approx. 560g
Wall thickness approx. 580g
Air-control double vents
Hermetic - sealing turnips
All transparent
This model guarantees maximum interior lighting. In the roof, as well as on the sides, there are large transparent windows through which sunlight falls. This tent looks original and attracts guests to the gardens created by cafes and restaurants.
Weight of roof approx. 580g
Wall thickness approx. 580g
Air-control double vents
Hermetic - sealing turnips
Multi-size - easy change of length
Windows with blinds
Side walls have grid windows that let air through. There is a Velcro blind at each of these windows, which can be developed at any time and covered with it, for example during rain or when you want to cover the interior of the tent.
Weight of roof approx. 240g
Wall thickness approx. 240g
Each wall is equipped with a built-in air-permeable grid. There is a blind over each of these mesh windows, which has Velcro over its entire length. These turnips, when developed, perfectly adhere to the wall, forming a closed whole. Therefore, tents with such walls can be used in two ways - and as party or garden tents, setting tables and chairs inside, and as storage facilities.
Weight of roof approx. 560g
Wall thickness approx. 500g
Air-control double vents
Hermetic - sealing turnips
Full plating
Tents with full walls PE They will work as storage facilities or temporary storage facilities. Thanks to them, everything inside the tent is completely obscured and protected from rain or dust.
Weight of roof approx. 240g
Wall thickness approx. 240g
Each wall is built of uniform, thick material. Tents with full walls SD are great magazines both during summer and winter. They are sealed on each side, so one can be sure that not only rain or snow will fall inside but also dust and other pollutants.
Weight of roof approx. 560g
Wall thickness approx. 500g
Air-control double vents
Hermetic - sealing turnips
The roof and side walls in this type of hull are 580 g/m2. It is resistant to strong gusts of wind or greater snowfall. The planks of this type can be used in year-round garage tents as well as as as long-term storage tents.
Weight of roof approx. 580g
Wall thickness approx. 580g
Air-control double vents
Hermetic - sealing turnips
Multi-size - easy change of length
Extremely robust and resistant tent hall, which can be used during production, assembly and maintenance work. Thanks to a fire-resistant plane of approx. 750 g/m2 in the storage tent, flammable materials such as wood, wooden pallets, plastic building materials and cardboard packaging can be stored safely. The HFR plank is distinguished by a slippery, smooth surface on which dirt or precipitation settles to a lesser extent.
Weight of roof approx. 750g
Wall thickness approx. 750g
Air-control double vents
Hermetic - sealing turnips
Multi-size - easy change of length
Flammable
When near a storage place where you want to set up a tent there are sources of fire, think about a fireproof storage tent where you can safely store your materials.
Weight of roof approx. 620g
Wall thickness approx. 620g
Air-control double vents
Hermetic - sealing turnips
Multi-size - easy change of length
Flammable
The hull is made of one thick material PVC. Roofs and side walls are one part. An additional convenience is the smaller entrance, which is located next to the entrance gate. That way, you don't have to open a bigger entrance every time you want to go inside.
Weight of roof approx. 600g
Wall thickness approx. 600g
Air-control double vents
Hermetic - sealing turnips
Flammable
The hull in this tent hall is fireproof and forms one part. The hull and structure form an integral whole here. In addition to the large entrance there is a side entrance, a smaller entrance, which can be rolled up and conveniently entered inside the tent.
Weight of roof approx. 720g
Wall thickness approx. 720g
Air-control double vents
Hermetic - sealing turnips
Flammable
Transparent roof
When you need a very bright interior of the tent, and you don't want it to be visible from the outside, this will be the best solution. In the roof there are very large, completely transparent windows, so the sunlight fully illuminates the tent.
Weight of roof approx. 580g
Wall thickness approx. 580g
Air-control double vents
Hermetic - sealing turnips
Multi-size - easy change of length
With lighting
Tents with these walls are available from the height of the side wall 2.5m. Round windows measuring about 50 cm are placed in the upper side of the side walls. Thanks to this placement, the interior of the tent is illuminated, but invisible to outsiders.
Weight of roof approx. 560g
Wall thickness approx. 500g
Air-control double vents
Hermetic - sealing turnips
This type of hull is available from a height of 2.5 m. Round windows are placed at the top of the tent. This is a great solution for workshop tents, where lighting is needed, but we do not want what we do to be visible to outsiders.
Weight of roof approx. 580g
Wall thickness approx. 580g
Air-control double vents
Hermetic - sealing turnips
Multi-size - easy change of length
The roof and side walls in this type of hull are 580 g/m2. It is resistant to strong gusts of wind or greater snowfall. The planks of this type can be used in year-round garage tents as well as as as long-term storage tents.
Weight of roof approx. 750g
Wall thickness approx. 750g
Air-control double vents
Hermetic - sealing turnips
Multi-size - easy change of length
Flammable
These tents will work as a workshop tent, where, for example, welding works are held. In the upper part of the hull there are round windows, thanks to which there is a supply of daylight inside the tent.
Weight of roof approx. 620g
Wall thickness approx. 620g
Air-control double vents
Hermetic - sealing turnips
Multi-size - easy change of length
Flammable
For containers
Tents with full walls PE They will work as storage facilities or temporary storage facilities. Thanks to them, everything inside the tent is completely obscured and protected from rain or dust.
Weight of roof approx. 240g
Wall thickness approx. 240g
Each wall is built of uniform, thick material. Tents with full walls SD are great magazines both during summer and winter. They are sealed on each side, so one can be sure that not only rain or snow will fall inside but also dust and other pollutants.
Weight of roof approx. 560g
Wall thickness approx. 500g
Air-control double vents
Hermetic - sealing turnips
The roof and side walls in this type of hull are 580 g/m2. It is resistant to strong gusts of wind or greater snowfall. The planks of this type can be used in year-round garage tents as well as as as long-term storage tents.
Weight of roof approx. 580g
Wall thickness approx. 580g
Air-control double vents
Hermetic - sealing turnips
Multi-size - easy change of length
Extremely robust and resistant tent hall, which can be used during production, assembly and maintenance work. Thanks to a fire-resistant plane of approx. 750 g/m2 in the storage tent, flammable materials such as wood, wooden pallets, plastic building materials and cardboard packaging can be stored safely. The HFR plank is distinguished by a slippery, smooth surface on which dirt or precipitation settles to a lesser extent.
Weight of roof approx. 750g
Wall thickness approx. 750g
Air-control double vents
Hermetic - sealing turnips
Multi-size - easy change of length
Flammable
When near a storage place where you want to set up a tent there are sources of fire, think about a fireproof storage tent where you can safely store your materials.
Weight of roof approx. 620g
Wall thickness approx. 620g
Air-control double vents
Hermetic - sealing turnips
Multi-size - easy change of length
Flammable
The hull is made of one thick material PVC. Roofs and side walls are one part. An additional convenience is the smaller entrance, which is located next to the entrance gate. That way, you don't have to open a bigger entrance every time you want to go inside.
Weight of roof approx. 600g
Wall thickness approx. 600g
Air-control double vents
Hermetic - sealing turnips
Flammable
The hull in this tent hall is fireproof and forms one part. The hull and structure form an integral whole here. In addition to the large entrance there is a side entrance, a smaller entrance, which can be rolled up and conveniently entered inside the tent.
Weight of roof approx. 720g
Wall thickness approx. 720g
Air-control double vents
Hermetic - sealing turnips
Flammable
Applicable compliance details related to this product
Manufacturer's name:
DAS COMPANY sp. z o.o.
Country:
Poland
Address:
Przemysłowa 10, 32-540 Trzebinia
E-mail:
info.ie@dascompany.com
The responsible person is the economic entity established in the EU that is responsible for specific product compliance obligations.
Lucyna Natkaniec:
Przemysłowa 10
32-540 Trzebinia
lucyna.natkaniec@dascompany.com
In order to provide you with easier browsing and convenient shopping on the Das Company, website, we need your consent to the use of cookies. Thanks to them, we can tailor ads to your needs and provide you with access to the latest improvements that we can implement thanks to our analytics. If you like cookies like us and you consent to the use of all cookies, click "ACCEPT COOKIES".
More information about Cookies policy